Unique Features of Slide Tite™

  • Slide Tite's unique construction allows the user to slide the tensioner anywhere along the entire length of the webbing/strapping.
    The excess webbing is taken up in the Slack Loop.

  • The built in bungee loop holds excess webbing/strapping during use and during storage.

  • Slide Tite works great for ultra short use cases.
    Hook to hook length can be as short as 11 inches.

  • Slide Tite's unique asymmetrical color scheme let's you quickly see when there is a twist in the webbing/strapping.

  • There is just one piece of webbing/strapping that is threaded through the tensioner with a hook at each end.
    It can't come unthreaded!

More Slide Tite™ Features

  • Heavy duty 2700 lbs burst strength (900 lbs working load) webbing.

  • Extra stitching at webbing ends for strong webbing and long life.

  • Large custom J hooks to grab easily on flat edges and large attach points.

  • Heavy duty hardened steel construction for a long life.

  • Overmolded handle for comfort.

  • Mesh storage bag lets you see what’s in it.

  • Designed in the USA.

How to store your Slide Tite™:

  • Slide the bungee loop off the bundle of webbing (strapping).

  • Relieve the tension in the webbing by squeezing the handle and then move it forward.

  • Pull on opposite ends of the webbing coming out of the tensioner until there is no webbing around the axle.

  • Disconnect the hooks.

  • Let the hooks hang down (and wobble to and fro) and pull on the shorter hook until the two Hook Segments are about the same length

  • Pull on the Hook Segments or the Loop Segment until all 3 segments are about the same length.